|
|
|
|
|
TIMING CHAINS & BELT DRIVES
Danny Bee belt drives are a premium cam timing drive that features adjustable cam centerline up to 10 degrees advance or retard. Available with rollerized cam retainer for reduced friction.
$775.00
|
|
|
AP BILLET TIMING CHAIN w/ DOUBLE ROLLER CAM RETAINER
*BILLET CONSTRUCTION
*9 POSITION CRANK GEAR FOR EASY CAM DEGREEING
*DOUBLE ROLLER BEARING THRUST PLATE FOR REDUCED FRICTION
$209.00
|
|
|
Pushrod choice is a very important part to building any engine. We have tested pushrod diameters and wall thickness in many different engine combinations. The bottom line is we know what is right for your engine combination. Below are popular sizes and prices we use on a regular basis. Please call us if you are un-sure about what pushrod is right for you please call us at 205-486-5520 or email us.
5/16 1 pc PUSHRODS $139.00 set
Suggested for any Hydraulic Cam, Hydraulic Roller, or Low Spring Pressure Solid Roller (200# seat or less)
3/8 1pc PUSHRODS $169.00 set
Suggested for all Solid Roller applications when cylinder head will accept 3/8 pushrod
3/8 - 7/16 TAPERED PUSHRODS $479.00 set
Suggest for high rpm & high spring pressure applications or any nitrous or forced induction engine.
MANTON 7/16-1/2-9/16 PUSHRODS
From $479.00 set
The best pushrod in the industry. These custom made pushrods are made specially for each application.
|
|
|
|
|
|
VALVESPRINGS
We have tested almost all valvespring brands out there. We carry a wide variety of springs to match all camshaft/head combinations. Through extensive testing we know what spring is right for you. We have listed our most popular selling springs below. If you do not see a spring that fits your combination please call or email.
|
Through our extensive testing of hydraulic roller camshafts we know what spring works well with theses style camshafts. We have had hydraulic roller engines make power to 8400 rpm.
This spring fits all Hydraulic Roller applications. The installed height is 1.850, which will work with almost all heads with the excepstion of AFR. This spring will handle .675 lift.
Same as BR29, but sets up at 1.900-1.950 in order to work with AFR head.
Perfect mild solid roller spring for up to .700 lift. 235# seat/610# open. Installs @ 1.950-1.580 diameter. Will fit most heads without machining.
Intermediate spring designed for high lift & rpm, use when you do not have the lifters to handle triple springs. Install at 1.950-2.100 depending part number and lift requirement. 250-300# seat & .800# seat
Triple Spring-Best max effort drag spring made! Installs @ 2.00-2.100 depending on part number350#seat-900-1000# open depending on installed height/part number. Up to .900 lift
Same as 47/48 but installs at 2.200 and will aceept 1.00 lift.
|
 |
RETAINERS/LOCKS/LOCATORS/SEALS
We carry a wide variety of titanium retainers, steel & titanium locks, spring locators for all spring combinations.
|
|
TITANIUM RETAINERS from $189 set
We offer standard and lightened versions of titanium retainers in both 7 & 10 degree versions from Manley, Comp Cams, and Xcelydyne
STEEL LOCKS from $24.95 set
We offer many different style locks, many for hard to find applications such as bead loc, 5/16, 7mm, and +.050 versions.
TITANIUM LOCKS from $149 set
We offer many different style locks, many for hard to find applications such as bead loc, 5/16, 7mm, and +.050 versions.
SPRING CUPS/LOCATORS from $39.00 set
METAL CLAD VALVESEALS from $24.00 set
We offer many different seal sizes from the industry standard .530 X 11/32 down to .420 X 7mm. Please call for your application.
|
